Fulham Programmable LED Drivers- Basic Programming

How to use a TPSB-100 Handheld Controller for basic programming of a Fulham programmable LED driver. Topics include connecting the controller to the driver, reading and setting current, and common error messages.

The full instruction manual for the handheld controller, including more advanced features, is available here.

The technical spec sheet for the controller can be found here.

HotSpot Plus Overview

Overview of the HotSpot Plus LED Driver & Emergency System. Under normal conditions, the HotSpot Plus functions as a dimmable 40W constant current LED driver, with a programmable output current range of 250-1400mA. During a power outage, this all-in-one system automatically engages an integrated backup battery, which can provide 5W of power for 180 minutes or 10W for 90 minutes.

Learn more here.

HotSpot1 Kit Installation

Installation of a HotSpot1 LED Emergency Retrofit System in a 4′ x 2′ fluorescent troffer. This kit features three linkable linear arrays. For full installation instructions, click here.

DirectAC LED Engines – Overview

An overview of Fulham’s DirectAC LED Engines. These 120V engines feature AC drive directly integrated on the LED board, creating a lower profile and simplifying installation. They provide a cost-efficient, reliable solution for wall sconces and ceiling luminaires.

Download the spec and installation instructions here.

Or view the product brochure here.

13W Round LED Retrofit Kit Installation

Installation of a 13W, 7″ Round DC LED Retrofit Kit in a typical round ceiling luminaire. For full installation instructions, click here.

39W Round LED Retrofit Kit Installation

Installation of a 39W, 9″ Round DC LED Retrofit Kit in a typical round parking garage luminaire. This kit is commonly used to retrofit 175W or 200W HID luminaires. For full installation instructions, click here.

Programmable dimming curve demonstration

A demonstration of how to program a custom dimming curve using Fulham’s SmartSet software and a WorkHorse LED programmable driver. Custom dimming curves enable step dimming and dim-to-off, and allow Fulham programmable drivers to match the dimming curves of previously installed drivers. For full instructions, click here.

Output current and auto programming demonstration

A demonstration of how to set output current and use the auto programming feature of Fulham’s SmartSet software with a WorkHorse LED programmable driver. Auto programming allows rapid programming of multiple drivers, without requiring the drivers to be powered. For full instructions, click here.