
Micro-Inverters / Emergency Power Supplies


Micro-Inverters / Emergency Power Supplies deliver power to any fixture (any tech type) in emergency mode for 90 minutes at their respective Emergency Wattage (12W, 25W or 50W, depending on the model used).
Saves money in two ways:
- Can run a fixture greater than 12W, 25W or 50W, respectively, which previously required a higher cost, higher wattage inverter
- Can run either one dimmable fixture up to 100W, 150W or 320W, respectively, or multiple fixtures in a system with combined wattage of 100W, 150W or 320W, respectively, in normal operation, reducing SKUs
Features
- Easy installation time: no need to open up a luminaire to connect this device to the driver
- Can be used with luminaires where the driver is not accessible, e.g. UFO high bays
- Under voltage protection, short circuit protection, overload protection
- Self diagnostic standard
- Uninterrupted Power Supply
- Universal input
- UL listed and CEC Title 20 compliant
- Auto Select Output of 120/220/277 VAC, 60Hz for 25W; 120/220/260 VAC, 60HZ for 12W and 50W
- The 12W Micro-Inverter dims luminaires of up to 100W down to 12W(30VA) in emergency with 0-10V dimming; down to 18W(30VA) max with TRIAC dimming; down to 12W(30VA) max without any dimming
- The 25W Micro-Inverter dims luminaires of up to 150W down to 25W(45VA) in emergency with 0-10V dimming; 25W(45VA) max without 0-10V dimming
- The 50W Micro-Inverter dims luminaires of up to 320W down to 50W(100VA) in emergency with 0-10V dimming; 50W(100VA) max without 0-10V dimming
- 0 – 50°C ambient rated
- 12hr recharge time for 25W and 50W; 24hr recharge for 12W
- Conduit for leads
- RJ11 port allows Bluetooth compatibility
- 50W offers Emergency Battery Disengage (EBD) feature
Spec Sheet and Brochure
Brochures – Literature
Specification Sheet
Installation Instructions
Micro-Inverters / Emergency Power Supplies